==============================
 Readme for GSE inc. Stopwatch
==============================

This readme will tell you how to install this program, how to use it, and what it was meant
to be used for.

To install and use:

1. Connect your calculator to your computer via USB or serial link
2. Open the folder containing this program if not already open
3. Right-click on the file STOPWACH.8xp and say Send to TI device
4. Once the transfer is done, press 2nd -> + -> 2 -> 1 and make sure there is a file called
   STOPWACH on the list
5. Press [PRGM], scroll down to STOPWACH, and press enter to paste its name onto the screen
6. Press enter to run the program.

Program info:

- 30 bytes long when on calculator
- Accurate to within the second when used for an hour or less.
- press [ON] or [CLEAR] to stop the program at any time

Intended uses:

Keep track of time in an accurately when devoid of other timing devices.

NOTE: Because the timer algorithm is based on experimental code, it is recommended that you
use a true stopwatch for times more than an hour, or whenever possible.  Also, make sure
that you have some free space in your RAM, lack of said spacee could cause memory errors or
slowing down of timer.